Victrex cryogenics polymer for energy industry

“VICTREX CT™ 200  is designed for dynamic sealing applications in the storage and transportation of gases at extremely low (cryogenic) temperatures

Valve seat insert made from VICTREX CT™ 200
© Victrex

 Victrex has designed a high-performance PEEK polymer to offer the cryogenics industry a sealing solution with a broader range of usage temperature compared to existing polymers such as PCTFE. 

As the latest member of the VICTREX CT™ PEEK polymers, the 200 grade series exhibits improved sealing over a wider range of temperatures, compared to commonly used materials such as PCTFE. It does so at low temperatures on account of its greater ductility, and at high temperatures due to its superior creep resistance.

VICTREX CT polymers have also been shown to maintain better dimensional stability, with a lower coefficient of thermal expansion than incumbent material. The higher thermal conductivity of these Victrex polymers enables a fast response to temperature changes, ensuring the material is engaged with the counter-surface at all times. In addition, laboratory testing indicates that they may require less torque to actuate since they have a lower static and dynamic coefficient of friction compared to PCTFE. This results in less wear, higher performance and a potential for cost savings.

“VICTREX CT 200 possesses the outstanding properties of PEEK, including high strength, and the ability to withstand aggressive chemicals,” commented James Simmonite, Director Energy at Victrex. “In particular, we designed the new polymer with a lower coefficient of friction compared to its cousin VICTREX CT™ 100. All of these characteristics put VICTREX CT™ 200 ahead of materials such as PCTFE for cryogenic applications involving gases such as LNG and nitrogen. This is particularly the case in relation to dynamic applications, such as seat inserts, which must remain leak-proof when mechanical movement occurs. VICTREX CT 200 means dynamic progress for the industry.”

Victrex expects VICTREX CT 200 will be of interest to a wide range of potential customers, including valve manufacturers, EPCs**, processors, and operators in Oil & Gas. The new product for the energy industry has successfully completed stringent TAT test as per the Shell Mesc 77/300 and holds promise for injection moulding, compression moulding and extrusion processing advantages.

Further information on Victrex: www.victrex.com

*)  LNG, Liquefied Natural Gas
**)  EPC, engineering, procurement, and construction